Application: Combination eyewash and shower safety station. Two GS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes.

Shower Head: 10" diameter orange ABS plastic.

shower valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod.

spray head assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from water.

eyewash bowl: 11 1/2" ABS plastic.

eyewash valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.

pipe and fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance.

supply: 1 1/4" NPT female top or side inlet.

waste: 1 1/4" NPT female outlet. Outlet can be positioned at either 8" or 20" above finished floor by reversing lower pipe nipples.

sign: Furnished with ANSI-compliant identification sign.

quality assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.

Available Options

• GC Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green.
• FC20 Regulates shower flow rate to 20 GPM.
• GRN Green ABS plastic shower head.
• YEL Yellow ABS plastic shower head.
• SSH Stainless steel shower head.
• AP275-100 Electric Light and Alarm Horn Light and alarm horn summon assistance when eye/face wash or shower is activated.
• AP250-015 Modesty Curtain Modesty curtain for mounting on safety station.
• TMV G3800 thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2009.